Classe Audio CA-5200 - MANUEL 2 User Manual download pdf (Page 217)

C-5

APPENDIX C

Result Codes:

OK n=0,1

ERROR Otherwise

On Return on-line to data mode

O0 Instructs the modem to exit on-line command mode and return

to data mode (see AT escape sequence, +++).

O1 This command issues a retrain before returning to on-line data

mode.

O3 This command issues a rate renegotiation before returning to

on-line data mode.

Result Codes:

OK n=0,1,3

ERROR Otherwise

P Select pulse dialing

This command configures the modem for pulse (non touch-tone)

dialing. Dialed digits are pulsed until a T command or dial modifier is

received. Tone dial is the default setting.

Qn Result code control

Result codes are informational messages sent from the modem and

displayed on your monitor. Basic result codes are OK, CONNECT,

RING, NO CARRIER, and ERROR. The ATQ command allows the

user to turn result codes on or off.

Q0 Enables modem to send result codes to the computer (de-

fault).

Q1 Disables modem from sending result codes to the computer.

Result Codes:

OK n=0,1

ERROR Otherwise

Appendix C

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 263 264

No comments

Classe Audio CA-5200 - MANUEL 2 User Manual Page 217