Classe Audio SSP-800 - V3.3 Owner's Manual download pdf (Page 60)

23-EN

For details on the control from a BLUETOOTH compatible device, refer

to the Owner’s Manual of the BLUETOOTH compatible device.

Pairing a BLUETOOTH compatible device with

SSP (Secure Simple Pairing)

Using your BLUETOOTH compatible device, select the

“Alpine CD Receiver” (CDE-SXM145BT/CDE-143BT only)/

“Alpine Digital Media Receiver” (UTE-42BT only) for

pairing.

Turn the Rotary encoder to change the head unit display

from “PAIR NO” to “PAIR YES”, and then press /ENTER.

If “PAIR NO” is selected, the connection will be canceled.

If the pairing was successful, “CONNECTED” is displayed

for a few seconds. The head unit then returns to its

previous state.

Pairing a BLUETOOTH compatible device without

SSP (Secure Simple Pairing)

Using your BLUETOOTH compatible device, select the

“Alpine CD Receiver” (CDE-SXM145BT/CDE-143BT only)/

“Alpine Digital Media Receiver” (UTE-42BT only) for

pairing.

Input the PIN code (“0000”) in a BLUETOOTH compatible

device.

Note

• The PIN code is fixed as “0000”.

If the pairing was successful, “CONNECTED” is displayed

for a few seconds. The head unit then returns to its

previous state.

Notes

• If the connection is unsuccessful, “FAILED” is displayed.

• After a successful pairing, the two devices should connect automatically

whenever the vehicle’s ignition is turned ON. However, should the

automatic connection fail, try reconnecting manually.

• Set “VISIBLE M” to VISI M ON to enable this unit to be recognised by a

BLUETOOTH compatible device, refer to “Setting the Visible Mode” on

page 24.

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH

functions. For details, refer to each individual function.

Note

• Set “BT IN” to ON, and then perform BLUETOOTH SETUP operation.

Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 23.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select “BLUETOOTH”, and then

press ENTER.

The BLUETOOTH setup mode is activated.

Turn the Rotary encoder to select the desired items and

then press ENTER.

BLUETOOTH:

BT IN

 PAIRE D DEV

 VISIBLE M

 CALL SOUND



CALLER ID

 PB UPDATE

*1/*2

 PB ORDER

 AUTO ANS

 SPEAKER SL

 FW VERSION

 FW UPDATE

*1 The items are not displayed during a phone call.

*2 The items are not displayed if “BT IN” is set to OFF. Refer to

“Setting the BLUETOOTH Connection (BT IN)” on page 23.

Turn the Rotary encoder to change the settings.

Press and hold AUDIOSETUP for at least 2 seconds.

The SETUP mode is canceled.

Notes

•Press r to return to the previous mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

With BLUETOOTH technology, you can place a hands-free call by a

BLUETOOTH-equipped mobile phone.

Audio information of a BLUETOOTH compatible mobile phone, a

portable audio player, etc., is controllable/playable wirelessly from this

unit.

 Setting item: BT IN

Setting contents:

OFF / ON (Initial setting)

ON:

Select when you want to pair your BLUETOOTH compatible phone

with this unit or/and use BLUETOOTH Audio function.

OFF:

Hands-Free Phone function and BLUETOOTH Audio are not used.

Note

• When “BT IN” is set to OFF, the indicators related to Hands-free phone

(c battery quantity and i signal strength (CDE-143BT/

UTE-42BT only)) will not be displayed.

Select one of 5 connected BLUETOOTH compatible devices that you

previously registered.

 Setting item: PAIRED DEV

Turn the Rotary encoder to select a BLUETOOTH

compatible device you want to use (you want to change

connection) and then press ENTER.

Turn the Rotary encoder to select “CONNECT” then press

ENTER to connect the selected device.

The connected device is marked with “l”. Select “DISCONNECT”

to disconnect this device. Select “CLEAR” when you want to clear

the device from the device list.

How to connect to a BLUETOOTH

compatible device (Pairing)

Setting the BLUETOOTH Connection

(BT IN)

Setting the BLUETOOTH Device

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 88 89

Comments to this Manuals

No comments

Classe Audio SSP-800 - V3.3 Owner's Manual Page 60

Comments to this Manuals

Related products and manuals for Processors Classe Audio SSP-800 - V3.3