Classe Audio SSP-800 - V3.3 Owner's Manual download pdf (Page 47)

10-EN

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time,

after changing the car battery, etc.

Turn off the unit power.

Remove the detachable front panel.

Press RESET with a ballpoint pen or similar pointed object.

Adjusting Volume

Turn the Rotary encoder until the desired sound is

obtained.

Setting Time

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP selection mode.

Turn the Rotary encoder to select GENERAL, and then

press ENTER.

AUDIO  GENERAL  DISPLAY  TUNER  SIRIUSXM

 iPod

 BLUETOOTH

* Displayed only when a siriusXM Tuner is

connected.(CDE-SXM145BT only).

Turn the Rotary encoder to select the CLOCK ADJ mode,

and then press ENTER.

The time indication will blink.

Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

When the hour has been adjusted, press ENTER.

Turn the Rotary encoder to adjust the minutes while the

time indication is blinking.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

• To synchronize the clock to another clock/watch or radio time

announcement, press and hold ENTER for at least 2 seconds after

setting the “hour”. Minutes will reset to “00”. If the display shows over

“30” minutes when you do this, the time will advance one hour.

• Pressing r will return to the previous mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

RESET button

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control.

For details, consult your Alpine dealer. Point the optional remote

control transmitter at the remote-control sensor.

* The illustration is for CDE-SXM145BT/CDE-143BT.

Connectable to Remote Control Interface Box

With an optional Alpine Steering Wheel Remote Control Interface

Box (not included), this unit is controllable from the vehicles

steering wheel controls. For details, contact your Alpine dealer.

Remote control sensor

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 88 89

Comments to this Manuals

No comments

Classe Audio SSP-800 - V3.3 Owner's Manual Page 47

Comments to this Manuals

Related products and manuals for Processors Classe Audio SSP-800 - V3.3