OWNER’S MANUALSSP-75Preamplifier/SurroundSound ProcessorV1.0
1.3.2.7 IR REMOTE CONNECTORSa) MAIN IR (Xantech compatible: 3.5” mini-jack x 1)b) ZONE IR (Xantech compatible: 3.5” mini-jack x 1)The MAIN IR jack all
2.1.3 VIDEO SOURCE COMPONENTSWe have delivered with the SSP-75 a product whichis powerful and flexible, yet simple. We recommendthat you use the audio
For remote ZONE video distribution (sending avideo signal to a second room utilizing the ZONEoutput), you must use Composite outputs. You willprobably
3.2.3 SYSTEM SETUPThis is another comprehensive setup section wherethe overall system performance is set. Here is where the theater system is matched
SECTION 5:SYSTEM HOOKUP SAFETY NOTE: Before you begin work we verystrongly advise that all electronic equipment beunplugged from the AC outlets. They
5.3.1.4 CHANNEL CONTINUITYAs you connect your components, make sure that a source’s left channel audio output goes to thecorresponding left channel au
There are two digital audio outputs. Theinformation available at both is the same data asinput to the currently accessed digital audio input. Ifyou ar
6.2.2 PERSONALIZE A NAMEIf you wish you can type in your own labels ormodify one of the names you’ve recalled from the Library. Press the ENTER key to
6.4.2 ADJUSTING INPUT SENSITIVITYPress the > to reach the next setup screen. 6.4.3 INPUT LEVEL SETUPHere you can set up the individual Analog input
6.5.2.1 MAIN DISCUSSIONPress the /\ or \/ key to select between ‘Large’ and ‘Small/THX’. Once you have selected a sizepress the > key to select the
2SAFETY INFORMATION1. To prevent fire or shock hazard, do not expose the SSP-75 to water or moisture. 2. Do not place the SSP-75 close to any heat-pro
Pink noise will begin coming from the Left Frontspeaker. Press the /\ or \/ (probably the /\) button tochange the noise level by 0.5dB steps until the
6.8.1 OSD DISCUSSIONThe next step in setup is to tell the processor whichbroadcast format you are using (NTSC or PAL). Alsoat this menu level is the o
7.1.5 OTHER DISPLAY INFORMATIONThe display also presents other information as appropriate:When you press TRIM on the remote wand the lower right numbe
To turn ‘ON’ the Zone when it is ‘OFF’: Press the‘ZONE’ button, ‘ZONE OFF’ appears, Press the‘STANDBY’ button on the remote or on the frontpanel and t
APPENDIX A:THX INFORMATIONTHX is an exclusive set of standards andtechnologies established by the world-renownedfilm production company, Lucasfilm Ltd
CONTENTSSAFETY INFORMATION 2CE NOTICE 2THANK YOU 2CLASSÉ DESIGN PHILOSOPHY 2ABOUT THIS MANUAL 2SECTION 1INPUTS, OUTPUTS AND CONTROLS 41.1 FRONT
SECTION 1:INPUTS, OUTPUTS AND CONTROLSUse the drawings in this section as your guide to the SSP-75. They show the locations of all controls, inputs, o
1.1.6 PANEL INFORMATION DISPLAYThe two lines of information displayed, and the litLEDs on the face of the SSP-75 combine to providea comprehensive vie
1.2 REMOTE CONTROL WANDThe keys on the SSP-75 remote are laid out in aneasy to use pattern. The first three rows, from DISPthrough MODE > are a set
1.2.12 TRIMAllows you to temporarily individually adjust up or down the volume of the Subwoofer, the Centerspeaker and the Surround channels. Utilizin
1.3 REAR PANELView page at the front for Rear Panel Inputs and Outputs1.3.1 INPUT CONNECTIONS1.3.1.1 ANALOG AUDIO INPUTSa) VID1 (Line level, single en
These outputs allow you to easily connect the SSP-75 to any power amplifier(s). We recommendutilizing the Balanced outputs to eliminate groundloops an
Comments to this Manuals