Classe Audio 30 Owner's Manual download pdf (Page 5)

A.C. LINE POWER

The Classé 30 preamplifier has no power switch. Its low power consumption and improved

sonics from always being ON led to the omission of an ON/OFF switch. In fact, while thoroughly

musical shortly after turn-on, the preamplifier will exhibit "sonic growth" during its first 300 hours of

use.

For optimum sonic performance, you should consider the use of the optional CLASSÉ REFERENCE

A.C. LINECORD

. Consult your dealer regarding this accessory.

SAFETY FEATURE:

The 30 preamplifier is designed with an auto-muting circuit which engages and is indicated by a

FLASHING GREEN LED when the unit is first connected, or after an AC power failure. After 15

seconds the STEADY GREEN LED signals that the unit is in STANDBY mode (Note: MUTE is ON

during STANDBY mode).

This feature will prevent any turn-on surges or unstable output from reaching the power

amplifier and possibly the loudspeakers. Similarly, make sure the MUTE is ON (STEADY GREEN)

again when removing A.C. line power.

CAUTION:

DISCONNECT AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE GROUND”

OR DEFEATING THE GROUND ON A 3-PRONG LINECORD MAY CREATE A SHOCK HAZARD. CONNECT

ALL INTERCONNECT CABLES BETWEEN THE ELECTRONICS BEFORE CONNECTING THE A.C.

LINECORDS TO THE WALL OUTLETS. THIS WILL REDUCE THE POTENTIAL SHOCK HAZARD. SEE ALSO

THE WARRANTY SECTION OF THIS OWNER'S MANUAL.

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Classe Audio 30 Owner's Manual Page 5